![]() ![]() You can either comment out the “dtoverlay=dwc2” in /boot/config.txt, or plug an OTG adapter to the data micro USB port on Raspberry Pi Zero. Remarks: if you ever enabled Ethernet Gadget on your Raspberry Pi Zero, you will need to disable it to use Zero4U. If you use this USB hub with other types of computer, you can use a USB cable (not included) to connect the mini-USB port on board to the up-stream USB port. The blue LED on board works the power indicator, and will lights up when power is connected.Įach USB port has a dedicated white LED as transaction indicator, and a dedicated electrolytic capacitor to help stabilizing the output voltage. However you can use the JST XH2.54 connector on board as the alternative power input port. The USB hub will take power directly from your Raspberry Pi Zero, so you don’t need to power the USB hub separately. The 4 pogo pins on the back will connect the PP1, PP6, PP22 and PP23 testing pads on Raspberry Pi Zero, hence no soldering will be needed. After mounting this USB hub to your Raspberry Pi Zero, it immediately has 4 USB ports that could transfer data in USB 2.0 high-speed. This is a 4-port USB hub for Raspberry Pi Zero, and it can be mounted to Raspberry Pi Zero back-to-back. ![]() We have tested it and confirmed that Zero4U can work well with Raspberry Pi Zero 2 W. ![]() Please see the overlapped photos bellow (thanks to Jeff Geerling for providing the photos), the DP testing pad moves a little bit to the left, but the center of the old DP pad still within the new DP pad. On Raspberry Pi Zero 2 W, although the DP pad moves a little bit, the move is so small that Zero4U’s pogo pin can still contact it. This version of Zero4U works with Raspberry Pi Zero V1.3 (with camera connector) and Raspberry Pi Zero (2) W (with the help from a ferrite ring, details here). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |